Bhakti Window Decal

Living in the Light Decal Sticker for Window / Car Application Instructions: Step 1: Clean area thoroughly with rubbing alcohol or soap and water Step 2: Firmly rub a plastic card across the clear transfer tape to remove any air bubbles Step 3: Peel the blue paper backing off the sticker. If the sticker clings to the backing slowly replace and repeat step 2. Step 4: Slowly lower the sticker onto the surface and rub it in place firmly with a plastic card. For best results, wait 24 hours before moving to the next step. Step 5: Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4. Removal Instructions: Step 1: Clean area thoroughly with rubbing alcohol or soap and water Step 2: Set a hair dryer on hot and hold just a few inches above the sticker, hold over the center of the sticker for a few seconds and then slowly begin to move around the rest of the sticker. Step 3: Use a plastic card at an angle to gently scrape up under the sticker and begin peeling the sticker away from the surface. For stickers that have been in place for long periods of time it may be necessary to repeat steps 2 and 3 a few times.